Stabilized ladle furnace steel slag for glycerol carbonate synthesis via glycerol transesterification reaction with dimethyl carbonate


Por: Okoye P.U., Abdullah A.Z., Hameed B.H.

Publicada: 1 ene 2017
Resumen:
Abundant waste from ladle furnace (LF) steel slag industry was utilized to catalyze the glycerol transesterification reaction with dimethyl carbonate (DMC) to synthesize valuable glycerol carbonate (GC). LF slag was modified using various sodium hydroxide (NaOH) loadings (1–15 wt.%), and the catalyst samples were characterized using XRD, FTIR, TPD-CO2, and EDS techniques. Modifying the LF using different NaOH loadings enhanced the stability, basicity, and basic strength of LF. Favorable reaction conditions at the best glycerol conversion and GC yield were investigated via reaction influencing parameter screening. Thus, the 10 wt.% NaOH incorporated in LF under the reaction conditions of 75 °C, DMC-to-glycerol molar ratio of 2, and 3 wt.% catalyst dosage achieved 99% glycerol conversion and 97% GC yield. The catalyst exhibited sufficient heterogeneity and was utilized in five successive cycles of the experiment without serious deactivation. © 2016 Elsevier Ltd

Filiaciones:
School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Penang 14300, Malaysia
ISSN: 01968904
Editorial
Elsevier Science Ltd, Exeter, United Kingdom, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, Reino Unido
Tipo de documento: Article
Volumen: 133 Número:
Páginas: 477-485
WOS Id: 000392678900038

MÉTRICAS