Correlation between mechanical properties and corrosion behavior of an Al 6061 alloy coated by 5% CH3COOH pressurized steam and RRA heat treated


Por: Mayen, Jan, Abundez, Arturo, Pereyra, Isa, Alcudia, Enrique, Porcayo-Calderon, Jesus, Colin, Jorge, Campillo, Bernardo

Publicada: 15 ene 2017
Resumen:
In this work, aluminium 6061 alloy samples were subjected to a 5% CH3COOH pressurized oxidizing steam process and to sequential heat treatments. The heat treatments effect on the ultimate tensile strength UTS, yield strength YS, and its correlation with the corrosion current density icorr and the corrosion potential Ecorr, along with the coating formed on the alloy surface were characterized. Empirical equations were developed in order to describe the behavior and correlation among the process parameters on the YS, UTS, icorr and Ecorr. The X-ray diffraction XRD and the Energy Dispersive Spectroscopy EDS were used to characterize the chemical composition of the oxide layer formed after the oxidizing steam process and the designed heat treatments. Chemical reactions were proposed following the EDS results and the reactants (alloy and steam), finding the formation of aluminium carbonate Al2(CO3)3, which is unstable and decomposes in a - Al2O3 alumina as the main phase, and the potential formation of a periclase oxide type (MgO) and a spinel oxide type (MgAl2O4) as the trailing phases, deposited on the material surface. According to the potentiodynamic polarization test results, the coated samples subjected to ageing (200 °C)-retrogression (250 °C)-reageing (150 °C) heat treatment showed an enhancement on its corrosion resistance without significant losses in the mechanical properties, when compared to the aluminium 6061-T6 alloy condition. © 2016 Elsevier B.V.

Filiaciones:
Mayen, Jan:
 Tecnol Natl Mexico, Ctr Natl Invest & Desarrollo Tecnol, Prolongac Palmira S-N, Cuernavaca 62490, MOR, Mexico

Abundez, Arturo:
 Tecnol Natl Mexico, Ctr Natl Invest & Desarrollo Tecnol, Prolongac Palmira S-N, Cuernavaca 62490, MOR, Mexico

Pereyra, Isa:
 Univ Autonoma Estado Morelos, CIICAp, Ave Univ 1001, Cuernavaca 62209, Mor, Mexico

Alcudia, Enrique:
 Tecnol Natl Mexico, Ctr Natl Invest & Desarrollo Tecnol, Prolongac Palmira S-N, Cuernavaca 62490, MOR, Mexico

Porcayo-Calderon, Jesus:
 Univ Autonoma Estado Morelos, CIICAp, Ave Univ 1001, Cuernavaca 62209, Mor, Mexico

 Univ Nacl Autonoma Mexico, Inst Ciencias Fis, Ave Univ S-N, Cuernavaca 62210, Mor, Mexico

Colin, Jorge:
 Tecnol Natl Mexico, Ctr Natl Invest & Desarrollo Tecnol, Prolongac Palmira S-N, Cuernavaca 62490, MOR, Mexico

Campillo, Bernardo:
 Univ Nacl Autonoma Mexico, Inst Ciencias Fis, Ave Univ S-N, Cuernavaca 62210, Mor, Mexico
ISSN: 02578972
Editorial
Elsevier Science S.A., 1001 Lausanne, Switzerland, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, Suiza
Tipo de documento: Article
Volumen: 309 Número:
Páginas: 344-354
WOS Id: 000396184400041

MÉTRICAS