Synthesis and Characterization of Chromate Conversion Coatings on GALVALUME and Galvanized Steel Substrates
Por:
Dominguez-Crespo, MA, Onofre-Bustamante E., Torres-Huerta A.M., Rodríguez-Gómez F.J., Rodil S.E., Flores-Vela A.
Publicada:
1 jul 2009
Resumen:
The morphology, composition, and corrosion performance of chromate conversion coatings (CCCs) formed on GALVALUME (Fe-Al-Zn) and galvanized steel (Fe-Zn) samples have been studied, and different immersion times (0, 10, 30, and 60 seconds) have been compared. The coated surfaces were analyzed using light microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrochemical measurements in a NaCl solution (3 wt pct). The electrochemical measurements were carried out using the polarization resistance, Tafel, and ac impedance methods. A nonuniform growth of the CCCs having a porous morphology and cracks that appear extended to the base metal was observed. The XRD patterns show that the coatings mainly consist of CrO(3), Cr(2)O(3), and traces of Cr(2)O (7) (-2) . The electrochemical results show that GALVALUME presents a better behavior than that of the galvanized steel alloys at each dipping time. The SEM micrographs show that the galvanized steel treatments resulted
Filiaciones:
Univ Nacl Autonoma Mexico, Fac Quim, Dept Met, Mexico City 04510, DF, Mexico
Univ Nacl Autonoma Mexico, Inst Invest Mat, Mexico City 04510, DF, Mexico
Instituto Politécnico Nacional, Grupo de Ingeniería en Procesamiento de Materiales CICATA-IPN, Unidad Altamira. Km 14.5, C.P. 89600 Tamps, Altamira, Mexico
|